Your Cart Contains:

Items:
Total:

View Basket

World War II

15mm Scale (1:107 - 1:87 15mm-18.5mm)
A range of superbly detailed and realistically based fortifications for 15mm WWII gaming. These pieces have been specifically designed with the Flames of War (FoW) standard base sizes in mind but can be used for scenery or terrain items for other 15mm wargames.

Landmark Buildings | Building kits | Bunkers, Objectives & More

Battlefield Bunkers and Fortifications

Blockhouse H677 for 88mm PAK 43/41 (OMAHA BEACH - Vierville)

Click above image for more pictures of a finished bunker

5cm KWK Enfilade Bunker
The 5cm KWK gun was extremely common along the Atlantic Wall and Westwall and was emplaced in a variety of bunkers from open-top wooden construction through to these hardened concrete bunkers that were typically used to guard the larger Pak43 bunkers.

This kit includes the resin parts ot make a single bunker and does NOT include the Gun, mount or extras. (We will be producing ametal-cast gun for this kit later in the year)

Radar Station
A Radar post consisting of a concrete command bunker including internal and external detailing and large radar mast.

Radar Base: 65mm (W)x 60mm(L) x 35mm (H)
Radar Array: 50mm(H) x 65mm(W) x 5mm (D)

Objective Markers
Sandbagged Fuel/ammo dump:
A small ammunition dump protected by sandbags ideal as an objective marker for Flames of War or other 15mm wargames and also as a scenery piece for dioramas or terrain.
(Click image below for larger images)

Approximate size: 50mm (L)x 32mm (W) x 23mm (H)

Ratio Oil Tanks Kit

This is an N-gauge plastic kit that makes up to an ideal objective marker - contains two tanks, bases and pipes and measure to a double set each of 25 x45mm i.e. 50mm x 45mm which just happens to fit perfectly on to a large Flames of War base.

Ratio Pallets/Sacks/Barrels

A set of sacks, barrels and pallets that work well with 15mm figures and vehicles. The sacks make excellent sandbags for vehicles amd the barrels are great as stowage or as scenic elements.
Pack contains 24 barrels, 42 sacks/sandbags and 10 pallets.

Antenociti's Workshop Barbed Wire
Approximately 30 foot (that's 30 real foot ~ 9m, not scale foot) of coiled double-stranded wire similar to the Presier wire suitable for 15mm - 54mm scales.

Camouflage Netting Kit

A completely new camouflage netting kit for ultra-realistic camouflage netting. The pack contains ~4 square feet of ultra-fine netting which is suitable for 15mm scales and upwards.
For 28mm scales and above you can add realistic leaves by using our Leaf Combi-Pack.

The netting comes in two basic colours (Green and Brown) and can be rolled, stretched, painted and sealed; you can drape it or make it solid by adding thinned-PVA to the weave.

New Colour - "Sand" - A very pale sand colour ideal for desert camouflage.

(The equivalent of our netting retails at almost £27.00 on a scale-modeller site.)

Tri-Colour Camouflage leaves
A Mix of Dark Green, Olive and a tiny bit of mid/light green to make an excellent foliage scatter for camouflage nets or shrubs on vehicles:

Camouflaging 15mm Vehicles - Tutorial

Seafoam Sprigs for 15mm Camouflage

A small box of Seafoam sprigs to be used to make bushes and branches for camouflaging 15mm vehicles and bases - ideal to be used in conjunction witht he tri-colour leaves above. (Use Scatter-Grip in the glue section of the site to glue the branches and leaves).

Camouflaging 15mm Vehicles - Tutorial

French Advertising & Propaganda Posters 1939 - 1945 (paper)

Re-sized to work with 15mm buildings these are authentic posters from the period printed out on standard paper at 1200DPI.

Instructions for use: Cut out and attach using PVA or similar. To hide the white edges of the poster run a black or dark gray pen along the edge before applying. Aging can be done with tea or weathering powders, washes and similar.

German Advertising and Propaganda Posters 1934 - 1945

Re-sized to work with 15mm buildings these are authentic posters from the period printed out on standard paper at 1200DPI.

Instructions for use: Cut out and attach using PVA or similar. To hide the white edges of the poster run a black or dark gray pen along the edge before applying. Aging can be done with tea or weathering powders, washes and similar.

Telegraph Poles

A HO scale railway kit that is spot on for 15mm and 20mm wargaming. There are 20 poles in the pack, all done in a wooden style, 10 uprights and then 10 uprights with angled supporting poles. Height of the poles is 110mm and diameter around 2mm - you can easily drill a 1mm into their base, insert a steel pin or wire then use that to place them onto a terrain board or table - alternatively just mount them on some plasticard (See our sheet materials page). Pack also includes nylon line for mimicking wire.

AW Says: This is a good value pack which is better than N-scale for 15mm gaming, N-scale telegraph poles are too short for terrain uses although they might be OK for adding to figure stands. We use these packs when making 15mm tables.

Security Fencing:

Fabulous little kit that enables you to build up Chainlink security fencing for either 15mm or 20mm wargames. Kit includes large number of concrete style fence posts, "wire" in the form of a small scale netting, 0.5mm wire for top slots and components to make various gates. Can make a larger area or length dependent on far apart you place the 40-odd posts

Example below for 15mm shows what can be done with this kit in enclosing a 25cm square (1 meter around) compound:

Aircraft 15mm (1:100) pre-painted Kits
These highly-detailed 1/100th scale replicas of the most famous World War II fighters are pre-decorated with accurate colour schemes and feature tampo-printed markings. They are easy to assemble and can be transformed into miniature "jewels" with a minimum of time and effort. Each model is supplied with a square display base and simple assembly instructions.

They make ideal planes for flames of war and other 15mm wargames and can be transformed into wrecks for objectives with the minimum of fuss and effort.

Accurate Miniatures 1:100 - E-Z Build Spifire MK Vb RAF 27th Squadron

These highly-detailed 1/100th scale replicas of the most famous World War II fighters are pre-decorated with accurate color schemes and feature tampo-printed markings. They are easy to assemble and can be transformed into miniature "jewels" with a minimum of effort.

Accurate Miniatures 1:100 - E-Z Build Spifire MK Vb RAF 92nd Squadron

These highly-detailed 1/100th scale replicas of the most famous World War II fighters are pre-decorated with accurate color schemes and feature tampo-printed markings. They are easy to assemble and can be transformed into miniature "jewels" with a minimum of effort.

Accurate Miniatures 1:100 - E-Z Build P-51D Mustang 352nd Ftr Group

These highly-detailed 1/100th scale replicas of the most famous World War II fighters are pre-decorated with accurate color schemes and feature tampo-printed markings. They are easy to assemble and can be transformed into miniature "jewels" with a minimum of effort.

Accurate Miniatures 1:100 - E-Z Build P-51D Mustang 357th Ftr Group

These highly-detailed 1/100th scale replicas of the most famous World War II fighters are pre-decorated with accurate color schemes and feature tampo-printed markings. They are easy to assemble and can be transformed into miniature "jewels" with a minimum of effort.

Accurate Miniatures 1:100 - E-Z Build Messerscmitt Bf-109F JG 51

These highly-detailed 1/100th scale replicas of the most famous World War II fighters are pre-decorated with accurate color schemes and feature tampo-printed markings. They are easy to assemble and can be transformed into miniature "jewels" with a minimum of effort.

Accurate Miniatures 1:100 - E-Z Build Messerscmitt Bf-109F JG 27

These highly-detailed 1/100th scale replicas of the most famous World War II fighters are pre-decorated with accurate color schemes and feature tampo-printed markings. They are easy to assemble and can be transformed into miniature "jewels" with a minimum of effort.