|
Speed Bond
Special modeling PVA that contains no fillers. Superior to many PVA glues. Has unique solvent chemistry for faster drying.
£3.25
AW says - Not all PVA glues are the same and Speed Bond proves this extremely well. This is a fast setting high quality PVA that has a very strong bond - this is an ideal assembly glue for scenery and terrain but NOT a general purpose PVA. Use this when you want good strength, for joining walls of buildings, foamboard and all other key assembly stages. (Use a cheaper general purpose PVA for groundwork where the advantages of Speed Bond are not needed)
For glue syringes used in exact glue application see here
|
|
- |
|
Deluxe Tacky-Glue
112g Tacky-glue in soft plastic bottle with re-sealable nipple top.
£3.75
AW says - a good reliable tacky glue in a handle bottle with a very good "stay-clean" top system.
Good for gluing plaster, foam board, grasses, flock, scatter, static grass, wood, Hirst Arts blocks found in our scenery Kits.
For glue syringes used in exact glue application see here |
|
|
|
Deluxe Scatter Grip:
150ml bottle of the excellent "Scatter Grip". This is a very thick viscous liquid glue that you can apply with a brush and remains tacky AND flexible after setting. It is ideal for foliage scatters, surface scatters and making hedgerows.
AW says - This glue is about as tacky as it gets! In combination with the puffer bottle below almost guarantees good flocking.
Scatter Grip is the stickiest, tackiest most adhesive LIQUID tacky glue that you will find anywhere. THis glue is highly and loudly recommended for sticking foliage to trees, lichen, flock and static grass application.
We absolutely recommend this product as being unbeatable for applying scatters, flock and static grass
|
|
| |
| |
|
Aliphatic Resin
Aliphatic yellow wood glue used in professional applications where balsa and hard woods are used. Dries faster than PVA at low temperatures. Water resistant between sandings. Less distortion when dry. Sands better than PVA and will take a stain.
RRP £3.65p Our Price £3.50p |
| |
|
| |
| |
| |
|
SUPER' PHATIC
High penetrating yellow aliphatic glue for close fitting pre-assembled joints. dries fast and bonds wood, foam and plastic. Waterproof when set and produces tougher joints than super glue.
AW says - this is a superb glue for close fitting fibrous materials such as card, paper and wood.
|
| |
|
| |
| |
- |
|
Deluxe Spray Adhesive.
100ml bottle with a re-useable, push button spray head. The size of this pack and the tight spray pattern allows the user to reach into areas that would be inaccessible to anything larger such as an aerosol.
The adhesive has similar properties to he Deluxe Scatter-grip in that it retains flexibility and tackiness after it has cured.
£4.50
AW says - This is an excellent spray for covering large areas quickly. It is not as tacky as Scatter Grip but far stronger than Thinned PVA or Scenic Cement/matte medium. It is a suspended version of the polymers in Scatter Grip but is not simply water-thinned, rather it has special wetting agents and suspension fluids to keep it spraying evenly with minimal clogging.
|
|
| |
|
| |
|
|
Foam-2-Foam
High tack for fast building. Strong hold, allows adjustment. Flexible, clear, strong when dry. Perfect for all foam types, white, blue, EPP etc. Also for wood, plastic to foam.
Aw-Says: this is the perfect sytrofoam glue for when UHU POR is not suitable - such as when repositioning is needed. It bonds styrofoam, polystyrene, depron, wood and plastics: so it's a VERY versatile glue and highly recommended. |
| |
|
|
| |
|
|
|
Roket Max!
Thick, maximum gap-filling adhesive
Sets in 10 to 20 seconds
AW says: Best gap-filling cyano glue we've used. This is also an excellent general purpose super glue.
|
| |
|
| |
|
Roket Rapid!
Medium viscosity, fast setting adhesive
Sets in 5 to 10 seconds
Roket Rapid (20g) |
| |
|
| |
| |
|
ROKET HOT
Super-thin, crystal clear , penetrating adhesive
Sets in 1 to 5 seconds
Roket Hot (20g)
AW Says: Fast-setting super-thin penetrating super glue - excellent stuff.
SAVE £1.00!
|
| |
|
| |
| |
|
Roket Blaster
Accelerator for Roket Super glue's Spray which permits ROKET cyano to bond difficult surfaces.
Pre-condition surfaces, then apply ROKET for instant bond.
(50ml)
AW Says - You don't know that you need this item until you have used it - then you wonder how you got by without it. It allows super glue to set instantly allowing the more exact bonding of parts, prevention of cyano "burn through" on sensitive surfaces and helping with many other super glue issues. |
| |
|
| |
| |
|
MICRO TIPS
Pack of six micro tips and teflon tubing for precise anti-clog application of super glues.
AW Says: Surprisingly useful the micro-tips prevent super glue form sticking to them meaning that they can be kept clean and used time and time again. The tips are very fine and provide a fantastic means of direct and precise application of the glue. Very useful indeed.
|
| |
|
| |
| |
|
UHU POR Styrofoam adhesive
Fast drying adhesive especially designed for bonding expanded polystyrene
components or to many other materials. By category it is a contact adhesive, i.e.
dual-side application of adhesive is required. Important: the solvents do not dissolve the
material.
AW says - pretty much the "de rigueur" contact adhesive for sticking styrofoam together...but use a different glue if you want to be able manipulate pieces after they have been bought together.
|
| |
|
| |
| |
|
Devcon 5 Minute Epoxy (tubes)
Clear, fast setting Epoxy for many uses including detailed water effects as used by Bruce Hirst of "Castlemolds"
AW Says - excellent crystal-clear high strength fast curing Epoxy. This is a very powerful epoxy glue with lots of uses - highly recommended. |
| |
|
| |
| |
|
UHU Sofortfest Extra Fast - 2 minute epoxy (35g)
This is a fast epoxy adhesive, which has a fast setting time.Mix proportion: 1 part binder to 1 part hardener (by volume). Working time (open time) up to 2 minutes; initial strength achieved after 5 minutes. Final strength = 800 N/cm2.
The adhesive is transparent once it has set; it will resists impact, ageing and the effects of moisture.
Comes with Mixing tray, mixing stick and plastic case to store glue & accessories in.
AW Says: Super-fast setting epoxy for when you need to do things quickly. It's great for doing small tasks with small amounts of epoxy. |
| |
|
| |
| |
|
UHU Extra all purpose adhesive
UHU - All Purpose Gel Extra -
20ml Blister |
| |
|
| |
| |
|
Faller Scenic Cement
Ready to use matte-medium that is a multi use product for Ballast, flock, foliages, static grass and more.
Non-toxic, water based cement.
Spray with Scenic Sprayer or brush on.
Dries to a clear, matte finish.
AW Says - You can make your own version of this relatively easily but this saves you both the time and messing around trying to get the right consistency and easy-spray ability.
If you want to save time over money, and want a product that is always going to act the same way, then use this rather than making your own.
Need a sprayer for this? Go here
|
| |
|
| |
|
Revell Contacta Professional Glue (mini)
12.5 gram liquid plastic glue ideal for model and figure kit plastics.
AW Says: Ideal plastic glue with excellent fine-control applicator tip built onto the glue bottle. (Not suitable for vinyl-based plastics)
|
| |
|
| |
| |
|
MekPak
MEK-PAK Fluid Cement makes building of models made of PLASTIKARD and other polystyrene kits so much cleaner and easier. Because it is a liquid it can be applied with a brush exactly were it is required without the 'stringing' normally associated with polystyrene cements.
AW says: possibly the best styrene cement there is. Bottle now comes with 'child-proof' cap
UK ONLY |
| |
|
| |
| |
 |
Canopy Glue
Pacer Canopy Glue is thw world renowned glue for sticking clear plastic without leaving any misting fogging or crazing of the plastic. Essential for gluing canopies on model aircraft and wherever a crystal clear bond is required. (Also very useful for fibre-optic cable)
RRP 2.99 Our price 2.30 |
| |
|
| |
| |
| |
 |
Zip Kicker Aerosol
The best working accelerator for zap and all other superglues. It forces the immediate cure of all cyanoacrylate glues. It is safe on plastics. It will not craze most plastics. It enhances gap filling properties and permits structural fillet forming. Solves most tough to bond combinations of materials.
RRP £5.10p Our Price £4.80p |
| |
|
| |
| |
 |
Zap superglue debonder
Debonder softens cured CA glue so it can be easily removed from fingers and other surfaces. It may craze some plastics.
RRP £3.10 Our Price £3.00 |
| |
|
| |
| |
| |
 |
Plasti-Zap
This glue is non-flammable, has medium-viscosity and sets clear and won’t attack paint. It was designed specifically for the modeller in mind and so is excellent for most plastic modelling projects, car mouldings and vinyl repairs.
RRP £2.70p Our Price £2.50p |
| |
|
| |
| |
 |
Slo-Zap
This glue is super thick and strong. It is designed for use on high stress areas. Great for gap-filling, laminating or forming fillets. It is a very slow cure CA glue so the modeller gets 30-40 seconds positioning time and it cures in 90 seconds.
RRP £5.30p our price £5.00p |
| |
|
| |
| |
| |
 |
Poly-Zap
This glue is designed to work on space age plastics: Lexan, polycarbonate, nylon and rubber. It is also ideal for clear canopies and ARTF kits. It is flexible and dries clear.
RRP £3.45p our price £3.25p |
| |
|
| |
| |
| |
 |
Zap odourless
This medium-thick glue is made from a 'No-more-tears' formula and is safe for all hobby foams (without a primer). It also works on balsa, plywood and most hobby materials. It cures in 8 seconds.
RRP £6.85p Our Price £6.49p |
| |
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
