| 
World War II
15mm Scale (1:107 - 1:87 15mm-18.5mm)
A range of superbly detailed and realistically based fortifications for 15mm WWII gaming. These pieces have been specifically designed with the Flames of War (FoW) standard base sizes in mind but can be used for scenery or terrain items for other 15mm wargames.
Coming Next in 15mm:
 Rustic Walls
 Town Walls (Low)
Town Walls (High)
 Dry-Stone Walls
See here for explanation of bars above
Building kits | Bunkers, Objectives & More | Aircraft | Landmark
Battlefield Bunkers and Fortifications
Blockhouse H677 for 88mm PAK 43/41 (OMAHA BEACH - Vierville)
Click above image for more pictures of a finished bunker
5cm KWK Enfilade Bunker (Now with 5cm Kwk Gun)
The 5cm KWK gun was extremely common along the Atlantic Wall and Westwall and was emplaced in a variety of bunkers from open-top wooden construction through to these hardened concrete bunkers that were typically used to guard the larger Pak43 bunkers.
 
5cm KWK open Bunker with 5cm Kwk Gun.
The 5cm KWK gun was extremely common along the Atlantic Wall and Westwall and was emplaced in a variety of bunkers from open-top wooden construction through to these hardened concrete bunkers that were typically used to guard key road points, installations and other defensive positions.
 
This kit includes a metal-cast 5cm kwk gun and a resin-cast open bunker.
Sentry hut with Barriers
No complex entrance, camp or major junction should be without its own Sentry Hut and barrier!
This metal-cast set includes the Hut, barrier and support posts all cast in white-metal.
5cm Kwk Gun
THis is the metal-cast 5cm kwk gun available on its own for those who bought previous bunkers without the gun in the kit.
Radar Station
A Radar post consisting of a concrete command bunker including internal and external detailing and large radar mast.
Radar Base: 65mm (W)x 60mm(L) x 35mm (H)
Radar Array: 50mm(H) x 65mm(W) x 5mm (D)
Objective Markers
Sandbagged Fuel/ammo dump:
A small ammunition dump protected by sandbags ideal as an objective marker for Flames of War or other 15mm wargames and also as a scenery piece for dioramas or terrain.
(Click image below for larger images)
Approximate size: 50mm (L)x 32mm (W) x 23mm (H)
Ratio Oil Tanks Kit
This is an N-gauge plastic kit that makes up to an ideal objective marker - contains two tanks, bases and pipes and measure to a double set each of 25 x45mm i.e. 50mm x 45mm which just happens to fit perfectly on to a large Flames of War base.
15mm Furniture
Some metal-cast scale furniture for adding to those ruined street scenes and half-destroyed houses!
Pack contains: Wardrobe, Armchair, Dresser, Grandfather Clock, Kitchen Cupboard, Bed and Upright Piano.
Ratio Pallets/Sacks/Barrels
A set of N-gauge sacks, barrels and pallets that work well with 15mm figures and vehicles. The sacks make excellent sandbags for vehicles amd the barrels are great as stowage or as scenic elements.
Pack contains 24 barrels, 42 sacks/sandbags and 10 pallets.
 Antenociti's Workshop Barbed Wire
Approximately 30 foot (that's 30 real foot ~ 9m, not scale foot) of coiled double-stranded wire similar to the Presier wire suitable for 15mm - 54mm scales.
Camouflage Netting Kit
A completely new camouflage netting kit for ultra-realistic camouflage netting. The pack contains ~4 square feet of ultra-fine netting which is suitable for 15mm scales and upwards.
For 28mm scales and above you can add realistic leaves by using our Leaf Combi-Pack.
The netting comes in two basic colours (Green and Brown) and can be rolled, stretched, painted and sealed; you can drape it or make it solid by adding thinned-PVA to the weave.
New Colour - "Sand" - A very pale sand colour ideal for desert camouflage.
(The equivalent of our netting retails at almost £27.00 on a scale-modeller site.)
Tri-Colour Camouflage leaves
A Mix of Dark Green, Olive and a tiny bit of mid/light green to make an excellent foliage scatter for camouflage nets or shrubs on vehicles:
Camouflaging 15mm Vehicles - Tutorial
Seafoam Sprigs for 15mm Camouflage
A small box of Seafoam sprigs to be used to make bushes and branches for camouflaging 15mm vehicles and bases - ideal to be used in conjunction witht he tri-colour leaves above. (Use Scatter-Grip in the glue section of the site to glue the branches and leaves).
Camouflaging 15mm Vehicles - Tutorial
Posters for 15mm gaming.
The advertising poster was just starting to appear widely in the late 20's and early 30's and in Europe and much of the World advertising was done by painting on to the sides of buildings rather than the construction of advertising billboards as was more common in the USA.
Quite often entire sides of building were covered with advertisements for anything from soap to airplanes, cigars to bananas, circuses to the olympics.
Even where paper-printed posters did proliferate they would be glued to the same buildings building up their own layer-after-layer of old adverts. It was quite common for old posters and painted signs to remain long after the event they were advertising was long since history and even today you can see faded adverts for the Monaco races of 1932 or one of the various World Fayres.
Advertising from the 1930's:
A wide ranging set of posters produced in the run up to the Second World War - these posters are ideal for attaching to the sides of buildings, whole or ruined and ideally should be weathered to look as through they are very aged.
French Advertising & Propaganda Posters 1939 - 1945 (paper)
Re-sized to work with 15mm buildings these are authentic posters from the period printed out on standard paper at 1200DPI.
Instructions for use: Cut out and attach using PVA or similar. To hide the white edges of the poster run a black or dark gray pen along the edge before applying.
Aging can be done with tea or weathering powders, washes and similar.
German Advertising and Propaganda Posters 1934 - 1945
Re-sized to work with 15mm buildings these are authentic posters from the period printed out on standard paper at 1200DPI.
Instructions for use: Cut out and attach using PVA or similar. To hide the white edges of the poster run a black or dark gray pen along the edge before applying.
Aging can be done with tea or weathering powders, washes and similar.
Telegraph Poles
A HO scale railway kit that is spot on for 15mm and 20mm wargaming. There are 20 poles in the pack, all done in a wooden style, 10 uprights and then 10 uprights with angled supporting poles. Height of the poles is 110mm and diameter around 2mm - you can easily drill a 1mm into their base, insert a steel pin or wire then use that to place them onto a terrain board or table - alternatively just mount them on some plasticard (See our sheet materials page). Pack also includes nylon line for mimicking wire.
AW Says: This is a good value pack which is better than N-scale for 15mm gaming, N-scale telegraph poles are too short for terrain uses although they might be OK for adding to figure stands. We use these packs when making 15mm tables.
Security Fencing:
Fabulous little kit that enables you to build up Chainlink security fencing for either 15mm or 20mm wargames. Kit includes large number of concrete style fence posts, "wire" in the form of a small scale netting, 0.5mm wire for top slots and components to make various gates. Can make a larger area or length dependent on far apart you place the 40-odd posts
Example below for 15mm shows what can be done with this kit in enclosing a 25cm square (1 meter around) compound:
Dornaplas Gravestones
This is a set of plastic gravestones including cruciform gravestone markers and similar. They are nominally "n gauge" but i've used these a lot for gravestone for 15mm and they are fine especially when put on the end of a little lump of freshly dug soil!
A single gravestone is about 5mm wide and 10mm tall and there is a total of 36 in the pack for just £3.50p
Javis Walling
Rough Dry Stone Walling
150mm long Approx~ 13-17mm tall, 10mm wide at base.
This is a good cheap option for stone walling: its cast in polyester resin and pre-coloured so that you do not have to paint it, although a quick bit of a dry-brush will do lots for its realism and looks. (This differs from the Dry Stone Wall by being more rustic and worn)
Curved Rough Dry Stone Walling
150mm long Approx~ 13-17mm tall, 10mm wide at base. Radius App~430mm
This is a good cheap option for stone walling: its cast in polyester resin and pre-coloured so that you do not have to paint it, although a quick bit of a dry-brush will do lots for its realism and looks. Curved section. (This differs from the Dry Stone Wall by being more rustic and worn)
Dry Stone Walling
150mm long Approx~ 17mm tall, 10mm wide at base.
This is a good cheap option for stone walling: its cast in polyester resin and pre-coloured so that you do not have to paint it, although a quick bit of a dry-brush will do lots for its realism and looks.
Curved Dry Stone Walling
150mm long Approx~ 17mm tall, 10mm wide at base. Radius App~430mm
This is a good cheap option for stone walling: its cast in polyester resin and pre-coloured so that you do not have to paint it, although a quick bit of a dry-brush will do lots for its realism and looks.Curved Section
Flexible Walling.
A flexible strip of walling that is approximately 10mm high and 1220mm (4 foot) long.
This is a cheap and simple way to make irregularly shaped low stone walls for your games.
        
|
